Model: PAG 30 ND Systems

Lot:  J1054.01 + J1054.02

Make: ROBOWORKER
Model: PAG 30 ND (two available)
Serial: 2096/2018 + 32108/2018
Located: Midwest, USA

Mohr Corporation is offering two robotic parts handling systems previously used in a PM facility for part handling from powder compacting presses. Return on investment should be very quick for the buyer if adding automation to current production. This system requires limited floor space and offers very good part handling for higher part quality and precision. Mohr can provide more details about the systems upon request. If you have questions or general comments, email with full contact details, name, phone number, company, and location for a quick Mohr reply.

Phone: +1 (810) 225-9494
Email: service@mohrcorp.com

PAG 30 ND Specifications:

  • Robot system: RL 30/3, BG2 linear robot: 3 Cartesian axes XYZ; 4th axis generated by motoric functions in the gripper 
  • Sinter trays with system: Flat, 216 mm x 279 mm (8,5 x 11 inch)
  • Pick cycle for PAG 30 ND without weighing: up to 25 strokes/min | weighing of each part: up to 20 strokes/min.
  • Operating system: Windows 7 | Control system: Beckhoff
  • Compressed air connection: min. 0.5 – max. 1.0 MPa, dry, oil-free acc. to ISO8573-1 class
  • Dimensions of the machine (the switch cabinet is integrated into the basic unit):
    L: 1,300 mm (1,620 mm with the double conveyor belt system)
    W: 1,060 mm
    H: 2,060 mm
  • Electrical connection 3 x 400 V, 50 Hz, 32 A | UL standards available: e. g. 3 x 480 V, 60 Hz, 32 A